 | | | Underfloor heating EN 1264 |
This program can design a layout for warm water underfloor heating from various manufacturers according to EN 1264, depending on which product-specific data records have been loaded.
Besides the different layout variations, the data records contain material lists, text for tender invitations and tenders from which various accessories and/or alternative items can be selected.
The program is very flexible in regards to definition and design. Floor coverings and soundproofing materials can either be selected from the default definitions or constructions can be defined, consisting of several different covering types. Entering room data is done per manifold in tables. Areas that are not occupied can be considered this way. The heating area can be covered efficiently if more than one heating circuit will be required. You can also differentiate between peripheral areas and areas that are occupied more often. Small peripheral zones can be routed together with the occupied zones in a single circuit. By defining a percentage rate, the portion of underfloor heating can be determined for the heat load of a room or the reduced output through assigned areas can be taken into consideration. Connecting lines that must be routed through other rooms are considered in the heating area as well as for the performance calculations.
Scope of functionality - Design according to EN 1264
- Product-specific data records from various manufacturers
- Standard floor coverings and soundproofing variations according to manufacturer's information
- Automatic allocation of manifold cabinet sizes with or without heat supply counter
- Individual room control can be selected as an option
- Different design variations for peripheral and occupied zones, separate, integrated and cramped peripheral areas
- Combination of underfloor heating and radiators within one room
- Consideration of connecting lines through other rooms
- Automatic or manual distribution to heating areas within a room
- Possibilities for manual correction of the pipe spacing, the peripheral zones, the underfloor heating temperature, the temperature drop as well as the heating circuits
- Hydraulic manifold adjustment (valve settings)
- Automatic material billing, invitation to tender and/or quotation including construction site lists with installation data
- Residual heat compensation with auxiliary radiator
- and much more.......!
| | | |
CAD system for creating routing plans including automatic generation for snaking, simple meandering or dual-pipe meandering paths, DXF export, FAX-/ SCAN-template import.
Optional DXF/DWG - Import/Export Additional module for reading drawings from other CAD systems.
Can be combined with HTCAD Floor plan design
Can be combined with HTCAD Routing
|
